Preparing your computer
There are a few steps you must perform to prepare your computer for a modem HotSync operation. Be sure to perform these steps before you leave your office so that your computer is ready to receive a call from your handheld.
To prepare a Windows computer for a modem
HotSync operation:
1.Confirm that the computer modem is connected and turned on, and that no communications applications, such as fax or telephony software, are running on a COM port.
Note: Make sure the computer is disconnected from all online services, such as America Online (AOL) and CompuServe. This helps to avoid conflicts with the COM port.
2.Start HotSync Manager if it is not already running, and from the HotSync Manager menu, choose Modem.
3.Adjust the following options as needed.
Serial Port Identifies the port for the modem. If you are
| unsure of the port assignment, look at the Modem |
| Properties in the Windows Control Panel. |
Speed | Determines the speed at which data is transferred. |
| Try the As Fast As Possible rate first, and adjust |
| downward if you experience problems. This |
| setting allows Palm Desktop software and your |
| handheld to find and use the fastest speed. |
Chapter 5 | Page 138 |
