Installing the batteries
To use your handheld, you must install two AAA alkaline batteries. The batteries fit behind the battery door on the back of the handheld. See “Battery considerations” in Appendix A for more information.
To install the batteries:
1.Press the latch on the battery door and lift the battery door away from your handheld.
Press tab to open battery door
2.Install the two AAA alkaline batteries supplied with your handheld into the battery compartment.
Note: A diagram in the interior of the battery compartment shows + and - ends of the batteries. When correctly installed, the clips in the battery compartment secure the batteries in place.
3.Insert the battery door back into place so that it is flush with the back of your handheld and “clicks” into position.
Important: Do not force the battery door. When the batteries are correctly installed, the battery door clips smoothly into place. If you feel resistance when replacing the door, make sure the door is aligned with the slots on the back of your handheld, and that the batteries are firmly seated in the battery compartment.
Page 9 | Introduction to Your Palm™ m100 Series Handheld |
