Palm m100 manual Transmits specific characters to the TCP/IP server

Wait For Tells your handheld to wait for specific characters from the TCP/IP server before executing the next command.

Wait For Prompt

Detects a challenge-response prompt coming from the server and then displays the dynamically generated challenge value. You then enter the challenge value into your token card, which in turn generates a response value for you to enter on your handheld. This command takes two arguments, separated by a vertical bar () on the input line.

Send	Transmits specific characters to the TCP/IP server
	to which you are connecting.
Send CR	Transmits a carriage return or LF character to the
	TCP/IP server to which you are connecting.
Send User	Transmits the User ID information entered in the
ID	User ID field of the Network Preferences screen.
Send	Transmits the password entered in the Password
Password	field of the Network Preferences screen. If you did
	not enter a password, this command prompts you
	to enter one. The Password command is usually
	followed by a Send CR command.
Delay	Tells your handheld to wait a specific number of
	seconds before executing the next command in the
	login script.
Get IP	Reads an IP address and uses it as the IP address
	for your handheld. This command is used with
	SLIP connections.
Prompt	Opens a dialog box and prompts you to enter text
	of some kind (for example, a password or a
	security code).
End	Identifies the last line in the login script.

4.Repeat steps 2 and 3 until the login script is complete.

5.Tap OK.

Chapter 6 Page 166