Panasonic KX-FG6550 Receiving phone calls only Auto answer on, TAM only LINE1 On OFF

4. Fax

Note:

LBy default, the unit reduces the size of the received document to 92% when printing (See feature #36 on page 81 for details).

4.7Receiving phone calls only – Auto answer ON

LKeep the front cover page open for button locations.

4.7.1Activating TAM ONLY mode (Telephone Answering Machine only mode)

You can activate TAM ONLY mode for each line or for both lines.

1Make sure feature #77* for LINE 1 or feature #77# for LINE 2 is set to “TAM ONLY” (page 83) beforehand.

2Press {AUTO ANSWER} repeatedly to display “ON”.

Example: LINE 1 is ON

TAM ONLY LINE1

ON OFF

LINE 1 LINE 2

Example: LINE 2 is ON

TAM ONLY LINE2

OFF ON

LINE 1 LINE 2

LThe unit announces “Answer set”, the set line and the current day and time.

LThe unit will announce the remaining recording time if it is less than 10 minutes.

LIf “GREETING ONLY” is displayed, the unit will not record any incoming messages (feature #10* and feature #10# on page 79, or feature 0621 and 0622 on page 89).

LThe remaining time for recording messages will be displayed.

Note:

LThe maximum incoming message recording time can be changed (feature #10* and

feature #10# on page 79, or feature 0621 and 0622 on page 89).

LWhile an incoming call is being recorded, you can monitor it through the speaker. If this feature is not required, turn OFF feature #67 (page 83).

LIf the unit announces “Memory full”, erase unnecessary messages (page 69, 71).

How phone calls are received

When receiving calls, the unit works as an answering machine.

LIf the call is a phone call, the unit will record

the caller’s message automatically.

LFax documents will not be received.

Changing the ring setting of the telephone answering machine

You can select from “2” (default), “3”, “4”, “5”, “6”, “7” or “TOLL SAVER”. This setting can be changed by feature #06* and feature #06# on page 79, or feature 0611 and 0612 on page 89.

–“TOLL SAVER”: When you call a line to which toll saver has been set, the unit answers after 2 rings when new messages have been recorded, and after 4 rings when there are no new messages. If you call your unit from a remote location to listen to new messages (page 73), you will know that there are no messages when the unit rings for the 3rd time. You can then hang up without being charged for the call.

61