Panasonic KX-FG6550 #67 Setting the incoming message monitor, Setting flash time

8. Programmable Features

kand lon the handset are not displayed properly, the line mode selection is incorrect. Set line mode to “A”.

{1} “A”

{2} “B” (default)

Note:

LYou can also program this feature with the handset (feature 0531 or feature 0532 on page 89).

{#}{6}{7} Setting the incoming message monitor

To hear an incoming message (ICM) from the speaker when the answering machine is recording the message.

{1} “ON” (default): You can monitor the incoming message.

{2} “OFF”: Deactivates this feature.

LINE 1:{#}{7}{2}{*} LINE 2:{#}{7}{2}{#}

Setting flash time

The flash time depends on your telephone exchange or host PBX.

{1} “90ms” {2} “100ms” {3} “110ms” {4} “250ms” {5} “300ms” {6} “400ms” {7} “600ms”

{8} “700ms” (default)

Note:

LThe setting should stay at 700 ms unless

pressing {FLASH/CALL WAIT} fails to pick up the Call Waiting call.

LIf the unit is connected via a PBX, PBX functions (transferring a call etc.) might not work correctly. Consult your PBX supplier for the correct setting.

LYou can also program this feature with the handset (feature 0521 and feature 0522 on page 89).

{#}{7}{3} Setting the incoming call tone This tone lets you know when a call is being received on the other line, during a conversation on the base unit.

{1} “OFF”: Deactivates this feature.

{2} “2” (default): The tone will sound 2 times.

{3} “ON”: The tone will sound for as long as the line rings.

Note:

LYou can also program this feature with the handset (feature 0*2 on page 90).

{#}{7}{4} Setting room monitor {1} “ON”

{2} “OFF” (default) See page 53 for details.

Note:

LYou can also program this feature with the handset (feature 0*3 on page 90).

{#}{7}{5} Setting the Caller ID number auto edit feature

{1} “ON” (default) {2} “OFF”

See page 47 for details.

{#}{7}{6} Setting the connecting tone

If you often have trouble when sending faxes, this feature allows you to hear connecting tones: fax tone, ring back tone and busy tone. You can use those tones to confirm the status of the other party’s machine.

{1} “ON” (default): You will hear connecting tones.

{2} “OFF”: Deactivates this feature.

Note:

LIf the ring back tone continues, the other party’s machine may not be a fax machine or may have run out of paper. Check with the

other party.

LThe connecting tone volume cannot be adjusted.

LINE 1:{#}{7}{7}{*} LINE 2:{#}{7}{7}{#}

Changing the receiving mode in the AUTO ANSWER setting

{1} “TAM/FAX” (default): Telephone Answering Machine/Fax mode (page 59)

{2} “FAX ONLY”: Fax only mode (page 60)

{3} “TAM ONLY”: Telephone Answering Machine only mode (page 61)

Note:

LWhen the unit is set to TAM ONLY mode, friendly reception (feature #46* and feature #46# on page 82) will turn OFF automatically. When you change the unit from TAM ONLY mode to TAM/FAX mode or FAX ONLY mode, friendly reception will be turned ON automatically.

{#}{8}{0} Resetting advanced features to their default settings

{1} “YES”

{2} “NO” (default)

To reset the advanced features:

1.Press {MENU}.

2.Press {#}, then {8}{0}.

83