1. Introduction and Installation

3 Open the back cover.

1.6 Ink film

The included film roll is a starter ink film.

1.6.1 Installing the ink film

Important:

LRemove all the blue shipping tape from the unit before installation.

1Open the front cover by pulling up the center part.

2Release the back cover by pushing the green button (1).

L You can also release the back cover by pushing in the green lever (2).

4Insert the front ink film roll by inserting its blue gear into the left slot of the unit (1). Insert the rear ink film roll by inserting its white gear into the left slot of the unit (2). L The ink film is safe to touch and will not rub off on your hands like carbon paper.

L Make sure the blue gear (1) and white gear (2) are installed as shown.

2

1

1

2

14For assistance, please visit http://www.panasonic.com/consumersupport

Page 16
Image 16
Panasonic KX-FG6550 Ink film, Installing the ink film, Open the back cover, Included film roll is a starter ink film