2. Preparation

The handset will ring at the low level for intercom calls if both lines are turned OFF.

LTo turn the ringer back ON, press {1}, {2} or {3} in step 3.

To turn the ringer OFF temporarily

While the handset is ringing for an outside call, you can turn the ringer OFF temporarily by pressing {OFF}. The handset will ring the next time a call is received on that line.

Ringer tone

LYou can select the handset ringer tone from one of 8 patterns for outside calls (feature 121 and 122 on page 88).

Handset receiver volume

While using {TALK} or {HOLD/INTERCOM},

press {v} or {e}.

Speaker volume

While using {SP-PHONE}, press {v} or {e}.

2.10Adjusting base unit volume

{LINE SELECT}

{SET} {STOP} {<}{>}{A}{B}

Ringer volume

You can set the base unit ringer volume for each line.

1.Press {LINE SELECT} repeatedly until “LINE 1” or “LINE 2” is announced.

L LINE1or LINE2will be displayed. L Do not select LINE1&LINE2. You

cannot set the ringer for both lines at the same time.

2.Press {A} or {B} repeatedly to select the desired volume.

L To change the ringer tone, press {<} or {>} repeatedly.

L To stop ringing, press {STOP}.

Note:

LFor outside calls, the base unit will ring at the level selected for the line.

For intercom calls, the base unit will ring at

the higher level of the 2 lines.

LYou can also adjust the base unit volume using the handset (feature 0*61 and 0*62 on page 90).

To turn the ringer OFF

Press {B}repeatedly to display RINGER OFF= OK?in step 2, then press {SET}.

L The base unit will display RINGER OFFand the line number while not in use.

LThe base unit will not ring for outside calls received on the selected line.

The base unit will ring at the low level for intercom calls if both lines are turned OFF.

LTo turn the ringer back ON, press {A} in step 2.

For assistance, please visit http://www.panasonic.com/consumersupport

29

Page 31
Image 31
Panasonic KX-FG6550 operating instructions Adjusting base unit volume, To turn the ringer OFF temporarily, Ringer tone