3. Telephone

53

3.18 Room monitor feature
This feature allows you to listen in on a room
where a handset or base unit is located. The
monitored extension will not ring, allowing you to
easily monitor, for example, a baby’s room from
different areas of the house. If you want to
prevent your unit from being monitored by other
extensions, leave this feature OFF (default
setting). An extension currently in use cannot be
monitored.
LKeep the front cover page open for button
locations.

3.18.1 Turning ON the room

monitor feature (Handset)

This allows the handset to be monitored.
Make sure the handset is not being used.
1Press {MENU}.
2Press {0}{9}.
3Press {1} to select “On”.
LPress {0} to select “Off”.
4Press {SAVE} (soft key).
5Press {OFF}.

3.18.2 Turning ON the room

monitor feature (Base unit)

This allows the base unit to be monitored.
1Press {MENU}.
2Press {#}, then {7}{4}.
3Press {1} to select “ON”.
LPress {2} to select “OFF”.
4Press {SET}.
5Press {MENU}.
Note:
LYou can also turn ON the base unit room
monitor feature using the handset (feature
0;3 on page 90).

3.18.3 Monitoring a room

Important information:
The unit to be monitored must not be in use.
With the handset
1Press {HOLD/INTERCOM}.
2Press {MONITOR} (soft key).
3To call the base unit, press {0}.
To call another handset, enter its extension
number ({1} to {4}).
LYour handset will start to monitor the
room through the destination unit.
LTo monitor from the speaker, press {SP-
PHONE}. You can place the handset on
the charger and continue monitoring. To
switch back to the receiver, press
{TALK }.
LThe monitored unit will display “Room
monitor”.
LIf an incoming call is being received, you
will hear 2 tones (feature 13 on page 88).
To answer the call, select the called line
by pressing {LINE1} (soft key) or
{LINE2} (soft key).
4To end monitoring, press {OFF}.
LThe base unit user can stop being
monitored by pressing
{LOCATOR/INTERCOM} or {SP-
PHONE}. The monitored handset user
can stop being monitored by pressing
{OFF}.
With the base unit
1Press {LOCATOR/INTERCOM}, then press
{MUTE}.
2To call the handset, enter its extension
number ({1} to {4}).
LThe base unit will start to monitor the
room through the handset.
LThe monitored unit will display “Room
monitor” then the duration time.
LIf an incoming call is being received, you
will hear 2 tones (feature #73 on page 83
and feature 0*2 on page 90). To answer
the call, select the called line by pressing
{LINE1} or {LINE2}.
3To end monitoring, press
{LOCATOR/INTERCOM} or {SP-PHONE}.
LThe monitored handset user can stop
being monitored by pressing {OFF}.
Note:
LIf the room monitor feature of the destination
unit is OFF, “DENIED” will be displayed and
busy tone will sound.
FG6550-PFQX2225ZA-en.book Page 53 Monday, August 8, 2005 8:16 PM