8. Programmable Features
90
{0}{6}{4} Changing the recording sound quality
{1} “Standard” (default): Recording sound
quality is standard, and the maximum recording
time is approximately 60 minutes.
{2} “Enhanced”: Recording sound quality is
clearer, and the maximum recording time is
approximately 30 minutes.
Note:
LYou can also program this feature with the
base unit (feature #53 on page 82).
{0}{8} Changing the display language
You can select either “English” (default) or
“Español” for the display language.
{1} “English” (default)
{2} “Español”
{0}{9} Room monitor (Handset)
{1} “On”
{0} “Off” (default)
See page 53 for details.
{0}{#} Setting the message alert
You can select whether or not the
Ringer/Message alert indicator on the handset
will flash when new messages have been
recorded (page 70).
{1} “On”: The Ringer/Message alert indicator
will flash.
{0} “Off” (default): Deactivates this feature.
Note:
LThe Ringer/Message alert indicator will not
flash for new messages while the handset is
in use.
L The Ringer/Message alert indicator acts as a
ringer indicator and as a message alert
indicator. This indicator will flash rapidly
when a call is received whether this feature is
ON or OFF.
LBattery life may be shortened when using this
feature (page 23).
LINE 1:{0}{*}{1}{1} LINE 2:{0}{*}{1}{2}Setting ringer tone for outside calls (Base unit)
You can select the base unit ringer tone from one
of 8 patterns for outside calls.
{1} “Tone 1” (default for LINE 1)
{2} “Tone 2” (default for LINE 2)
{3} “Tone 3”
{4} “Tone 4”
{5} “Melody 1”
{6} “Melody 2”
{7} “Melody 3”
{8} “Melody 4”
Note:
LWhen selecting the ringer tone, the base unit
will ring. If the base unit ringer volume has
been turned OFF (page 29), the base unit will
not ring.
LYou can also program this feature with the
base unit (feature #17* and feature #17# on
page 79).
{0}{*}{2} Setting the incoming call tone (Base unit)
This tone lets you know when a call is being
received on the other line, during a conversation
on the base unit.
{1} “On”: The tone will sound for as long as the
line rings.
{2} “2” (default): The tone will sound 2 times.
{0} “Off”: Deactivates this feature.
Note:
LYou can also program this feature with the
base unit (feature #73 on page 83).
{0}{*}{3} Room monitor (Base unit)
{1} “On”
{0} “Off” (default)
See page 53 for details.
Note:
LYou can also program this feature with the
base unit (feature #74 on page 83).
{0}{*}{5} Selecting the line for telephone calls (Base unit)
To determine which line is selected when you
press {SP-PHONE} for telephone calls.
{1} “Line1”: LINE1 will be selected.
{2} “Line2”: LINE2 will be selected.
{0} “Auto” (default): When making a call, LINE
1 will be selected. If that line is unavailable, LINE
2 will be selected. When answering a call, the
ringing line will be selected. When you call back
using caller information (page 46), the indicated
line will be selected.
Note:
LYou can select a line manually regardless of
this setting by pressing {LINE1} or {LINE2}.
LYou can also program this feature with the
base unit (feature #37 on page 81).
LINE 1:{0}{*}{6}{1} LINE 2:{0}{*}{6}{2}Changing the ringer volume (Base unit)
{1} Low
{2} Medium (default)
FG6550-PFQX2225ZA-en.book Page 90 Monday, August 8, 2005 8:16 PM