Panasonic KX-FG6550 operating instructions Basic features

8. Programmable Features

8.3 Basic features

{#}{0}{1} Setting the date and time

LEnter the date and time using the dial keypad. See page 31 for details.

LYou can also program this feature with the handset (feature 4 on page 88).

{#}{0}{2} Setting your logo

LEnter your logo using the dial keypad. See page 32 for details.

LINE 1:{#}{0}{3}{*} LINE 2:{#}{0}{3}{#}

Setting your fax number

LEnter your fax number using the dial keypad. See page 34 for details.

{#}{0}{4} Printing a confirmation report

To print a confirmation report for fax transmission results (page 55).

{1} “ON”: A confirmation report will be printed after every transmission.

{2} “OFF”: Confirmation reports will not be printed.

{3} “ERROR” (default): A confirmation report will be printed only when fax transmission fails.

LINE 1:{#}{0}{6}{*} LINE 2:{#}{0}{6}{#}

Changing the ring setting in TAM/FAX mode or TAM ONLY mode

To change the number of rings before the unit answers a call in TAM/FAX mode (page 60) or TAM ONLY mode (page 61).

{2} “2” (default) {3} “3” {4} “4” {5} “5” {6} “6” {7} “7”

{0} “TOLL SAVER”

Note:

LYou can also program this feature with the handset (feature 0611 and feature 0612 on page 89).

{#}{0}{7} Changing the ring setting in FAX

ONLY mode

To change the number of rings before the unit answers a call in FAX ONLY mode.

{1} “1” {2} “2”

{3} “3” (default) {4} “4”

LINE 1:{#}{1}{0}{*} LINE 2:{#}{1}{0}{#}

Changing the maximum recording time for incoming messages

{1} “1 MIN”: 1 minute

{2} “2 MIN”: 2 minutes

{3} “3 MIN” (default): 3 minutes

{0} “GREETING ONLY”: Only plays the greeting message.

Note:

L If you select “GREETING ONLY” for the line(s), the unit will answer a call with the greeting message, and then hang up. The unit will not record any incoming messages for the line(s).

LYou can also program this feature with the handset (feature 0621 and feature 0622 on page 89).

{#}{1}{1} Setting the remote operation ID

LEnter a 2-digit number (00–99). The default ID is “11”.

Note:

LYou can also program this feature with the handset (feature 063 on page 89).

{#}{1}{3} Setting the dialing mode

If you cannot make calls, change this setting depending on your telephone line service. {1} “PULSE”: For rotary pulse dial service. {2} “TONE” (default): For tone dial service.

Note:

LYou can also program this feature with the handset (feature 051 on page 88).

{#}{1}{6} Setting the recording paper size

{1} “LETTER” (default): Letter or legal size paper.

{2} “A4”: A4 size paper.

LINE 1:{#}{1}{7}{*} LINE 2:{#}{1}{7}{#}

Setting the ringer tone for outside calls

You can select the base unit ringer tone from one of 8 patterns for outside calls.

{1} “TONE 1” (default for LINE 1) {2} “TONE 2” (default for LINE 2) {3} “TONE 3”

{4} “TONE 4” {5} “MELODY 1” {6} “MELODY 2” {7} “MELODY 3” {8} “MELODY 4”

Note:

LWhen selecting the ringer tone, the base unit will ring. If the base unit ringer volume has

79