![](/images/new-backgrounds/1267455/267455495x1.webp)
Mounting and Dismounting Media
Chapter 9 Managing Media
Using the SNSM Media Functions
4On the Media Browser screen, select from the Select Media list the media you plan to move manually. If desired, you can reduce the number of entries in the media list by entering a filter in the Media Filter field. This field accepts the wildcard character (asterisk *). You can also select all media by clicking the Select All button.
5Click OK after you are finished selecting media.
6Select from the Destination Archive dropdown list the destination library to which you plan to manually move the media you just selected.
7When you are ready to flag the selected media for moving manually, click Apply.
8When the Status screen informs you that the media have been successfully flagged for moving manually, click Close.
9Complete the process by manually removing the media from the source library.
10Access the Library Operator Interface from the StorNext home page by choosing Library Operator Interface from the Admin menu. To enter media into the destination library, select the destination library and then click Enter Media.
Use the procedures in this section to mount and dismount media in a tape drive as needed.
Mounting Media
Use the following procedure to mount media.
1From the SNSM home page, choose Library > Mount from the Media menu. The Mount Media screen appears.
StorNext User’s Guide | 226 |