Modifying a Tape Drive
Figure 136 Configure Drives Screen
Chapter 8 Managing Drives and Disks
Working with Tape Drives
Note: If you want to enable compression on some devices but not others in the Type>>Device>>Slot list, you must complete this procedure twice: once to enable compression on selected devices, and a second time to specify devices without compression.
Use this procedure to modify configured tape drives.
1From the SNSM home page, choose Drive > Config from the Admin menu. The Configure Drives screen appears.
2Select a drive from the Configured Drive List, and then click Modify. The Modify Drive screen appears.
StorNext User’s Guide | 194 |
