Chapter 7 Using Internal Effects (VS8F-2)

Example 2: Use a Microphone

Example 3: Place a Limiter on the

Simulator on a Vocal Track to be

Stereo Mix Master Output

Recorded.

General Strategy: Insert the effect on the MIX bus.

General Strategy: Insert the effect in the Input Mixer.

Details for this Example: Select Patch P067 as FX2, insert on

Details for this Example: Select Patch P128 as FX3, insert on

Master Block.

Input 2.

Begin by Selecting the Effect

 

Begin by Selecting The Effect:

1.Press [PLAY (DISPLAY)].

2.Hold [SHIFT] and press [F4 (EFFECT B)].

3.Press [F1 (FX3)]. The Effect 3 screen appears in the display. If “FX3” does not appear above [F1], press [F6 (EXIT)] until it does. Then, press [F1 (FX3)].

4.Press [F2 (Sel)]. The effects list appears in the display.

5.Use the Time/VALUE dial or [ ], [ ], [ ],

and [ ] to move the cursor to Effect Preset Patch P128 “DR20 → 87.”

6.Press [F4 (Exec)] or press [ENTER/YES] to select the effect. The EFFECT 3 screen appears in the display.

1.Press [PLAY (DISPLAY)].

2.Hold [SHIFT] and press [F3 (EFFECT A)].

3.Press [F4 (FX2)]. The Effect 2 screen appears in the display. If “FX2” does not appear above [F4], press [F6 (EXIT)] until it does. Then, press [F4 (FX2)].

4.Press [F2 (Sel)]. The effects list appears in the display.

5.Use the TIME/VALUE dial or [ ], [ ], [ ],

and [ ] to move the cursor to Effect Preset Patch P067 “Limiter.”

6.Press [F4 (Exec)] or press [ENTER/YES] to select the effect. The EFFECT 2 screen appears in the display.

Next, Set Up the Mixer

Next, Set Up the Mixer

1.Press the SELECT button for Input 2. The button indicator lights, and the Input Mixer Screen appears in the display.

2.Use [ ], [ ], [ ], and [ ] to move the cursor to “FXIns.” Or, press [F3 (FX3In)]. If “FX3In” does

not appear above [F3], press [PAGE] a few times until you see “FX3In”, and then press [F3 (FX3In)]. This will move the cursor directly to “FXIns.”

3.Press [ENTER/YES].

4.Use [ ] and [ ] to move the cursor to FX3. Use the TIME/VALUE dial to change the Effect Insert Switch to

“Ins.”

5.Press [PLAY (DISPLAY)] to return to the Playlist display.

1.Press [EDIT/SOLO]. The button indicator lights, and the Master screen appears in the display.

2.Use [ ], [ ], [ ], and [ ] to move the cursor to “FXIns.” Or, press [F2 (FX2In)]. If “FX2In” does

not appear above [F2], press [PAGE] a few times until you see “FX2In”, and then press [F2 (FX2In)]. This will move the cursor directly to “FXIns.”

3.Press [ENTER/YES].

4.Use [ ], and [ ] to move the cursor to FX2. Use the TIME/VALUE dial to change the Effect Insert Switch

to “Ins.”

5.Press [PLAY (DISPLAY)] to return to the Playlist display.

106

Page 106
Image 106
Roland VS-1824 owner manual 106