Roland VS-1824 Midi Thru Midi Thru Switch, Out, MIDAcc.Note Accent Note, MIDNrm.Note Normal Note

4.Use [ ], [ ], [ ], and [ ] to move the cursor to “MIDI Thru,” and use the TIME/VALUE dial

to change the setting to “Out.”

MIDI Thru (MIDI Thru Switch)

This switches the function of the MIDI OUT/THRU connector. The default setting is “OUT.”

Out:

Out put MIDI message of VS-1824 Select this in case you want to send out note message of metronome or settings of mixer parameters (message of control change or exclusive message).

Thru:

Out put the MIDI message coming from MIDI IN connector (through-out).

5.Hold [SHIFT] and press [EXT SYNC].

The Sync/Tempo screen appears in the display.

6.Use [ ], [ ], [ ], and [ ] to move the cursor to “Sync Gen.,” and use the TIME/VALUE dial to

change the setting.

Sync Gen. (Sync Generator)

This determines on which clock the metronome is played.

Off: Metronome is played on Tempo map.

MTC: Metronome is played on Tempo map.

MIDIclk: Metronome is played on Tempo map.

SyncTr: Metronome is played on Sync track.

7.Press [EXIT/NO].

The System menu icon appears in the display.

8.Press [F5 (METRO)].

The Metronome Parameter screen appears in the display.

Chapter 4 Recording Operations

9.Use [ ], [ ], [ ], and [ ] to move the cursor and use the TIME/VALUE dial to change each of

the settings.

Metronome Out

This selects where the metronome is output. For now, select “MIDI.” Selecting “Off” prevents you from making any settings related to the Metronome.

Off:

The metronome sound is not output.

INT:

The metronome sound is output from the MONITOR jacks.

MIDI:

The metronome signal is only transmitted via the

MIDI OUT connector.

Metronome Mode

This determines when the metronome is played.

Rec Only:

The metronome sounds only during recording.

Rec&Play:	Chapter
The metronome sounds during playback and	4
recording.
Metro Level (Metronome Level)
This adjusts the volume level (0-127) of the metronome
output.
MID:Acc.Note (Accent Note)
This sets the note number (C0-G9) for the downbeat.
When a drum set is playing, this selects specific
percussion sounds.
MID:Nrm.Note (Normal Note)
This sets the note number (C0-G9) for the upbeats. When
a drum set is playing, this selects specific percussion
sounds.
MID:MetroCh (Metronome Channel)
This sets the MIDI channel (1-16) for transmitting
Metronome sound MIDI Note Messages.
MID:Acc.Velo (Accent Velocity)
This sets the velocity (1-127) for the downbeats.
MID:Nrm.Velo (Normal Velocity)
This sets the velocity (1-127) for the upbeats.

10.Press [PLAY (DISPLAY)] to return to the Playlist display.

69