Roland VS-1824 owner manual Adjusting the Panning of Channel Linked Channels

Chapter 5 Using the Digital Mixer

Adjusting the Panning of Channel Linked Channels

When Channel Link is on, it is possible to adjust the channels’ overall stereo position while preserving their pan positions relative to each other. If you want to adjust the pan for each channel independently, use the following procedure.

If you adjust the pan while sound is playing, you may notice “blips” in the sound. This is not a malfunction. If you find it annoying, adjust the pan when the sound is not playing.

1.Press the SELECT button for the input or track channel that is linked.

2.Press [F1 (MIX)]. If “MIX” does not appear above [F1], press [PAGE] until you see “MIX” above [F1], and then press [F1 (MIX)].

3.Press [F6 (PRM.V)]. Each of the pan positions appears in the display.

4.Use [ ], [ ], [ ], and [ ] to move the cursor. Then use the TIME/VALUE dial to adjust each

setting.

Channel

Even-Numbered Channel Pan

Total Balance

Odd-Numbered Channel Pan

Mix Assign Switch

When this is set to “On”, the source at each Input channel is assigned directly to the MIX bus. Set this to “on” when you simply want to mix an input without actually recording it.

Total Balance

With the balance between both channels preserved, this adjusts the total left-right balance (L63-R63).

Odd-Numbered Channel Pan

This adjusts the balance (L63-R63) of the odd-numbered (left) channel.

Even Numbered Channel Pan

This adjusts the balance (L63-R63) of the even-numbered (right) channel.

5.Press [PLAY (DISPLAY)] to return to the Playlist display.

When “VS-1824” is selected on fader mode (p. 75)

When a new song is created, CHANNEL LINK for the DIGITAL input is ON. You can adjust parameters of each individual channel if you turn OFF the CHANNEL LINK. Once the CHANNEL LINK is turned OFF, you can select the channel edit screen of the L channel on the LCD by pressing the [DIGITAL].

To select the channel edit screen for the R channel, hold down [SHIFT] and press [DIGITAL].

The volume of the L channel will be adjusted by moving the [DIGITAL] channel fader.

If you want to adjust the volume of the R channel, move the DIGITAL fader while holding the [SHIFT] down.

When “VS-1880” is selected on fader mode (p. 75)

When a new song is created, the CHANNEL LINKs for DIGITAL input and 7/8, 9/10, 11/12, 13/14 15/16 and 17/18 are ON. You can adjust parameters of individual channels if you turn OFF their CHANNEL LINK. You can select the edit screen for odd numbered channels by pressing the [DIGITAL] button or SELECT button for the target channel.

To select the channel edit screen for even numbered channels, hold down the [SHIFT] and press the [DIGITAL] button or press the SELECT button for the target channel.

The volume of the L channel will be adjusted by moving the [DIGITAL] channel fader.

If you want to adjust the volume of the R channel, move the fader for DIGITAL while holding the [SHIFT] down.

78