Roland VS-1824 owner manual Song Copy Archives, 225, If Disk Memory Full Appears in the Display

7.Press [ ] to move the cursor to “Destination Drive.”

8.Use the TIME/VALUE dial to select the destination drive and partition. Press [F5 (SelDr)] to view a directory of

drives. Then use [ ], [ ], [ ], and [ ] to select the destination drive, and use the TIME/VALUE

dial to select the partition. Once you have selected the destination drive, press [F1 (Back)].

Chapter 17 Using Hard Drives

Song Copy Archives

Use the following procedure to copy a song that cannot fit on a single disk:

1.Select the drive containing the source song you want to copy as the current drive (p. 228).

2.Press [PLAY (DISPLAY)].

3.Hold [SHIFT] and press [F1 (SONG)]. The Song menu icon is displayed.

4.Press [F2 (AcStr)].

If “AcStr” does not appear above [F2], press [PAGE] until “AcStr” appears above [F2], and then press [F2 (AcStr)].

9.If the source and the destination drives are different,

press [ ]. Move the cursor to “Erase All Songs” and use the TIME/VALUE dial to set the value.

Erase All Songs

When this is set to “On,” the destination drive is initialized before the copy procedure is performed. If you want to perform the Song Copy procedure without erasing any songs currently on the destination drive, leave this setting “Off.”

10.Press [F4 (Exec)]. A confirmation message appears in the display.

11.Press [ENTER/YES]. “STORE Current ?” appears in the display. Press [ENTER/YES] if you want to save changes made to the current song, otherwise press [EXIT/NO].

12.When the Song Copy Playable procedure is finished, the screen returns to the Playlist display.

If “Disk Memory Full” Appears in the Display

This indicates the destination drive does not have enough free space, or the number of songs on the destination drive exceeds the maximum number (200 songs) that can be stored on the drive. If this message appears, the Song Copy procedure is canceled.

Chapter 17

5.Press [ ] to move the cursor to “Source Song.”

6.Use the TIME/VALUE dial to move the cursor to the song you want to copy and press [F3 (MARK)]. By pressing [F2 (ALL)], you can place and remove Marks from all songs. Press [F1 (SelSg)] to view a directory of songs. From here, after you have Marked the song(s) you want to copy, press [F1 (Back)].

7. Press [ ] to move the cursor to “Destination Drive.”

225