79
Chapter 5 Using the Digital Mixer
Chapter 5
Linking the Faders of Two or More Channels (Fader Group)
The faders of two or more channels (inputs/tracks) can be
assigned to groups, so that when the fader of any channel is
operated, the fader levels (volume levels) of all channels in
that group will be adjusted as well.
When fader group settings have been made, you can adjust
the overall volume of a group while preserving the volume
balance of the channels included in that group.
1. Press [SELECT (CH EDIT)] for the channel (input or
track) you wish to assign to a fader group.
2. Press [PAGE] so that [F4] indicates “Group,” and then
press [F4 (Group)].
3. Press [F6 (PRM.V)].
4. Use [ ], [ ], [ ], and [ ] to move the
cursor, and use the TIME/VALUE dial to set the
parameters.
Group
Select the group (1–8) to which you wish to assign the
fader. Channels for which the same number is selected
will be assigned to the same group. Moving any fader
within the group will adjust all faders assigned to that
group.
If you select “Off,” the fader will not be assigned to any
group, and will function normally.
5. Press [PLAY (DISPLAY)] to return to Play mode.
An image of fader group
(Faders cannot be moved.)