Chapter 7 Using Internal Effects (VS8F-2)

Two Examples of Using Loop

Example 2: Add Reverb to Drum

Effects

Tracks

Example 1: Add a Delay to a Recorded Vocal Track.

General Strategy: Connect the effect in the Track Mixer,

post-fader.

Details for this Example: Select Patch P024 as FX2, connect

to Track 6.

Begin by Selecting the Effect:

1.Press [PLAY (DISPLAY)].

2.Hold [SHIFT] and press [F3 (EFFECT A)].

3.Press [F4 (FX2)]. The Effect 2 screen appears in the display. If “FX2” does not appear above [F4], press [F6 (EXIT)] until it does. Then, press [F4 (FX2)].

4.Press [F2 (Sel)]. The effects list appears in the display.

General Strategy: Connect the effect on multiple Track Mixer channels, post-fader.

Details for this Example: Select Patch P006 as FX3, and

connect on Tracks 7-12.

Begin by Selecting the Effect:

1.Press [PLAY (DISPLAY)].

2.Hold [SHIFT] and press [F4 (EFFECT B)].

3.Press [F1 (FX3)]. The Effect 3 screen appears in the display. If “FX3” does not appear above [F1], press [F6 (EXIT)] until it does. Then, press [F1 (FX3)].

4.Press [F2 (Sel)]. The effects list appears in the display.

5.Use the TIME/VALUE dial or [ ], [ ], [ ],

and [ ] to move the cursor to Effect Preset Patch P006 “Medium Room.”

5.Use the TIME/VALUE dial or [ ], [ ], [ ],

and [ ] to move the cursor to Effect Preset Patch P024 “Long Delay.”

6.Press [F4 (Exec)] or press [ENTER/YES] to select the effect. The EFFECT 2 screen appears in the display.

6.Press [F4 (Exec)] or press [ENTER/YES] to select the effect. The EFFECT 3 screen appears in the display.

Next, Set up the Mixer

1.Press Track 7 SELECT. The button indicator lights, and the Track Mixer Screen appears in the display.

Next, Set up the Mixer

1.Press the SELECT button for Track 6. The button indicator lights, and the Track Mixer Screen appears in the display.

2.Use [ ], [ ], [ ], and [ ] to move the cursor to “FX2.” Or, press [F2 (FX2)]. If “FX2” does not

appear above [F2], press [PAGE] a few times until you see “FX2”, and then press [F2 (FX2)].

3.Use the TIME/VALUE dial to change the FX Switch to “Pst” (“post-fader”).

4.Press [ ] and [ ] to move the cursor to the Effect Send Level, and use the TIME/VALUE dial to change the

level to “70.”

5.Press [PLAY (DISPLAY)] to return to the Playlist display.

2.Use [ ], [ ], [ ], and [ ] to move the cursor to “FX3.” Or, press [F3 (FX3)]. If “FX3” does not

appear above [F3], press [PAGE] a few times until you see “FX3”, and then press [F3 (FX3)].

3.Use the TIME/VALUE dial to change FX Switch to “Pst.”

4.Press [ ] and [ ] to move the cursor to the Effect Send Level, and use the TIME/VALUE dial to change the

level to “70.”

5.Repeat Steps 1-4 for Track 8-12. Press the Track SELECT button for each of these tracks to make the effect settings.

6.When you are finished setting up effect loops on Tracks 7-12, press [PLAY (DISPLAY)] to return to the Playlist display.

108

Page 108
Image 108
Roland VS-1824 owner manual Two Examples of Using Loop, Effects