Top and Rear Panels

Mixer Section

fig.00-03

 

 

 

7

8

1

 

9

2

 

3

 

10

4

 

11

5

 

12

6

 

13

1. PEAK Indicators

3. SELECT/CH EDIT (Select/Channel Edit) buttons

Use these indicators to confirm the correct recording level as set with the INPUT knobs. The indicators are set at the factory to illuminate when the input audio reaches 0 dB. You can change the peak level indicator setting so the indicators illuminate when audio reaches -3 or -6 dB. (p. 255)

2. INPUT Knobs

These knobs adjust the sensitivity of the INPUT jacks 1 through 8. Turn the knob fully clockwise for mic level (-50 dBu), or fully counter-clockwise for line level (+4 dBu).

Use these buttons to change Input Mixer settings for the analog inputs, digital inputs, stereo inputs, and effect returns. The currently selected channel’s indicators will light.

1–8:

Each input channel (1–8)

DIGITAL:

Digital input

ST IN:

Stereo in

EFFECT 1/3 RTN:

Effect 1/3 Return

EFFECT 2/4 RTN:

Effect 2/4 Return

You can assign an input to be recorded to a track by holding down the track’s STATUS button, then pressing the desired SELECT button for the input or source you wish to record.

Use these buttons to input alphabetical characters for Song Names, etc., when the [NUMERIC/ASCII] is lit.

18

Page 18
Image 18
Roland VS-1824 owner manual Top and Rear Panels, Mixer Section, Peak Indicators, Input Knobs