Roland VS-1824 owner manual 235, Sourse Song, +Verify

CD-R Backup

1.Select the drive (internal IDE hard drive) containing the source song to be backed up as the current drive.

2.Place a blank CD-R/CD-RW disc in the CD-R/CD-RW drive.

For details refer to the column “Inserting a CD” (see p. 234).

3.Press [CD-RW/MASTERING].

4.Press [F4 (CDRBk)].

If you are using a finalized CD-RW disc that contains data, “Erase?” appears in the display. To erase the existing data, press [ENTER/YES]. “Erase Disc” appears and the contents of the CD-RW disc are erased. If you do not wish to erase the data, press [EXIT/NO], and insert a new disc.

5.Press [ ], [ ], [ ], and [ ] to move the cursor. Then use the TIME/VALUE dial to adjust each settings.

Chapter 18 CD-R Backup

SOURSE SONG

Mark the songs you want to back up.

Use the TIME/VALUE dial to move the cursor to the song you want to back up, and then press [F3 (MARK)]. You can choose more than just one song to backup. By pressing [F2 (ALL)], all songs will be marked for backup.

Press [F1 (SelSg)] to display a directory of songs. From the song directory, press [F1 (Back)].

If this is turned “On,” verification will be performed	Chapter
+Verify
after the dong data has been backed up, to check	18
whether or not the data was saved correctly.

*When backing up to a CD-R, we recommend that you also execute +Verify to check whether the data was bask up correctly.

*Since +Verify checks the entire CD-R disc, the operation will take a certain amount of time.

*If as a result of the “+Verify” operation you receive a warning that was not written correctly, please make a backup on another disc.

CD Speed

x4: The song will be written at quadruple speed (706 kilobytes per second).

x2: The song will be written at double speed (353 kilobytes per second).

The available speeds will depend on the Roland- approved CD drive connected to the VS-1824.

235