Roland VS-1824 owner manual Phrase Trim Out, 160

Chapter 10 Track and Phrase Editing

Phrase Trim Out

This adjusts the point at which the phrase ends without changing the phrase’s position on the timeline. This is convenient for trimming the edges of a phrase to be looped.

If [F2 (All)] is pressed, all tracks are selected to be moved.

7.Press [F1 (Back)].

8.Use [ ], [ ], [ ], and [ ] to move the cursor, and use the TIME/VALUE dial to set the parameters.

TO Time

1.Press [PLAY (DISPLAY)].

2.Hold down [SHIFT] and press [F2 (TRACK)].

3.Press [F1 (Tr/Ph)] so that the Phrase Edit Menu appears.

4.Press [PAGE] so that [F5] indicates “TrimO,” and then press [F5 (TrimO)].

5.Press [F1 (Selph)].

6.Press the STATUS button for the track that you wish to trim.

*If you want to select TR 1-12, press [FADER/MUTE] several times until the “TR” indicator lights.

If you want to select TR 13-18, press [FADER/MUTE] several times until the “TR” indicator blinks.

→ “Switching the Fader Functions” (p. 71)

Alternatively, you can use [ ], [ ], [ ], and

[ ] to move the cursor to the phrase that you wish to trim, and press [F3 (MARK)] or [ENTER/YES].

The STATUS button turns red.

TO (To Point)

You can specify time of trim out.

9.Press [F4 (Exec)].

10.When the display indicates “Complete,” press [PLAY (DISPLAY)]. You will return to Play mode.

160