Roland VS-1824 System and Global Settings, System Settings for Each Song, Fader Match, 249

Chapter 21 System and Global Settings

System Settings for Each Song

These are overall system settings that can be saved with each song. These settings are lost if the power is turned off without the song being saved, or if the system settings are reset to their original conditions.

Fader Match

During Automix playback, or when you use [FADER/MUTE] to reassign the physical faders from track channels to input channels, there will be times when the physical fader positions may not correspond to their actual stored volume settings. In such instances, the position of each fader is represented by a black dot, and the actual level that is set is represented by a white circle. Use the following procedure to adjust the Fader Match settings:

fig.12-15

Actual volume level

Each fader position

1.Hold [SHIFT] and press [F5 (SYSTEM)]. The System Menu icon is displayed.

If the System Menu icon does not appear, press [F6 (EXIT)].

2.Press [F1 (SYSPM)].

If “SYSPM” does not appear above [F1], first press [PAGE] until “SYSPM” appears, and then press [F1 (SYSPM)].

3.Use [ ], [ ], [ ], and [ ] to move the cursor to “Fader Match.”

If “Fader Match” is not displayed, press [F1 (Prm1)].

4.Use the TIME/VALUE dial to change the setting for Fader Match.

Jump:

The actual stored fader value will change the instant the physical fader is moved. The stored value will instantly update to match the physical fader position. (This is the default setting.)

Null:

The stored fader value will change only after the physical fader matches the position of the stored value. The physical fader must be moved to the stored fader position before the value will change.

5.When you are done setting Fader Match, press [PLAY (DISPLAY)] to return to the Playlist display.

The left/right [CURSOR] buttons can also be used to access any additional parameters that are not displayed.

Chapter 21

249