Roland VS-1824 owner manual Setting Up for Mastering Using Step Editing, 119

14.Select the Master Section settings.

Use [ ], [ ], [ ], and [ ] to move the cursor and the TIME/VALUE dial to adjust each of the

values.

Monitor Select

Equalizer Mode

Direct Out

Effect Insert

15.Press [F4 (Exec)]. “EZ ROUTING Step Edit is finished!!” appears in the display.

WARNING: EZ Routing settings will override any existing mixer settings you have already made.

16.You can save your setup as an EZ Routing template, or Exit [F6 (EXIT)] to leave this display without saving. To save the setup, press [F3 (SAVE)]. The Routing Save screen appears in the display. Save the setup using the procedure described in “Saving an EZ Routing Template,” p. 123.

Chapter 8 EZ Routing

Setting Up for Mastering Using Step Editing

Select this when creating mixing down to create a final two- track stereo master tracks for burning onto a CD-R. To cancel the settings procedure, press [F6 (EXIT)].

1.Press [EZ ROUTING].

The EZ Routing icon appears in the display.

2.Press [F5 (Exec)]. If “Exec” does not appear in the display above [F5], press [PAGE] until you see “Exec,” and then press [F5 (Exec)].

3.Press [F4 (Mstng)].

4.Specify which sources are to be output to the MIX bus. Press the Input SELECT buttons and the Track SELECT buttons for all mixer channels you want to include. Use

[ ] and [ ] to move the cursor and the TIME/ VALUE dial to select the V-Track you want to play back.

	Source assigned to the MIX bus
	Track assigned to the MIX bus
Source		Chapter 8
Track
V-Track

5. Press [F2 (STEP → )].

119