Roland VS-1824 owner manual Playback Operations, Display Regions, Center Part of the Display

Chapter 3 Playback Operations

The Display

Display Regions

Center Part of the Display

The level meter is displayed here.

fig.12-03

Pre-fader / Post-fader indication

When you first turn on the VS-1824, the following display will appear.

fig.02-01

This display is separated into three different areas. You can

use [ ], [ ], [ ], and [ ] as well as the Time / Value dial to change settings in each area. The currently active area is outlined with a bold line.

Press [SHIFT] and [ ] or [ ] to change the currently active area.

Upper Part of the Display

You can switch between Pre-fader and Post-fader by turning the TIME/VALUE dial or pressing [PAGE] until “PRE” or “POST” appears above [F4], and by then pressing [F4].

■Song Information display

If you hold [SHIFT] and press [PLAY (DISPLAY)] twice, the level meter will be replaced by the Song Information display.

fig.12-02

Scene Number

Shift Lock Status

Sample Rate Song Name

	Icon	Comment
	Remaining Disk Space Song Capacity
Locator Bank		Recording Mode

Synchronization Status

The current time of the song is displayed here in hours, minutes, seconds, frames, and subframes. To move the

timeline, press [ ] and [ ] to select the desired time increment, then turn the TIME / VALUE dial to change the value. You can also move the timeline in measure or beat increments, or by Marker number.

fig.12-01

SMPTE Time Code Marker Number

Hold [SHIFT] and press [PLAY (DISPLAY)] twice more to return to the level meter.

Cursor Measure Beat

38