Roland VS-1824 owner manual 156, Quantize

Chapter 10 Track and Phrase Editing

7.Press the Track STATUS button for the desired destination track. The STATUS button turns red.

*If you want to select TR 1-12, press [FADER/MUTE] several times until the “TR” indicator lights.

If you want to select TR 13-18, press [FADER/MUTE] several times until the “TR” indicator blinks.

→ “Switching the Fader Functions” (p. 71)

8.Press [F1 (Back)].

9.Use [ ], [ ], [ ], and [ ] to move the cursor, and use the TIME/VALUE dial to set the parameters.

FROM (From Point)

You can specify the exact sync point of the phrase to be moved as the FROM time. The FROM time will be moved to the position designated as the TO time. You can specify a FROM time that is not necessarily located within the phrase. The destination of the Move is the TO time.

TO (To Point)

You can specify the destination time of move as TO time.

Quantize

If you set this to “ON”, the TO time (destination time of the Move) will be set at the beginning of the measure set by the tempo map or sync track. For example, it's easy to Move a phrase one measure when the phrase length is

2.0seconds as when the tempo map setting is 120. However, you will need a complicated calculation if the tempo is 119.1. If you set Quantize ON, you can avoid this.

Further, if this is set to ON, Overlap will be automatically set to ON also.

10.Press [F4 (Exec)].

You cannot mix on one V track regularly recorded audio with audio that has been recorded with the CDR Recording Mode ON.

In Songs that use a Recording Mode other than “CDR” follow these rules:

•Even on the mastering tracks, “CDR” V-tracks can only be moved to V-tracks which already have been recorded with “CDR” data, or to new V-tracks which have no data recorded on them.

•V-tracks recorded within a song with a recording mode other than “CDR” cannot be moved to mastering tracks which are already recorded with the “CDR” recording mode ON.

If the above rules are not followed, and the MOVE command would mix CDR audio with regular audio, then “Found Illegal Track Pair!” appears in the display and phrase move cannot be executed. Please press [ENTER/YES] and select the move destination again.

11.When the display indicates “Complete,” press [PLAY (DISPLAY)]. You will return to Play mode.

156