Roland VS-1824 owner manual Peak Hold, Remaining Recording Time, System and Global Settings, 250

Chapter 21 System and Global Settings

Peak Hold

You can set the display to hold the maximum values (peaks) while the level meter is shown in the graphic display.

Peak indication

1.Hold [SHIFT] and press [F5 (SYSTEM)]. The System Menu icon is displayed.

If the System Menu icon does not appear, press [F6 (EXIT)].

2.Press [F1 (SYSPM)].

If “SYSPM” does not appear above [F1], first press [PAGE] until “SYSPM” appears, and then press [F1 (SYSPM)].

3.Use [ ], [ ], [ ], and [ ] to move the cursor to “Peak Hold Sw.” If “Peak H. Sw” is not

displayed, press [F1 (Prm1)].

4.Use the TIME/VALUE dial to change the setting for Peak Hold Switch.

Peak Hold Sw (Peak Hold Switch)

With this set to “On,” the level meter in the graphic display holds the display of the maximum levels.

5.When you are done setting Peak Hold, press [PLAY (DISPLAY)] to return to the Playlist display.

Each time you press [PLAY (DISPLAY)], the peak display is reset (cleared). Switching to a display that does not show level meters, such as switching to the Track Mixer screen, Song Information or other displays also resets the peak display.

Remaining Recording Time

The amount of free drive space available for recording in the current song is displayed as “Remain” in the upper part of the Playlist display when Song Information is shown. You can select the units of measurement for this value.

*“Remain” does not appear while the level meter or fader/pan screens are displayed (p. 39). Hold [SHIFT] and press [PLAY (DISPLAY)] until the Song Information screen is displayed.

1.Hold [SHIFT] and press [F5 (SYSTEM)]. The System Menu icon is displayed.

If the System Menu icon does not appear, press [F6 (EXIT)].

2.Press [F1 (SYSPM)].

If “SYSPM” does not appear above [F1], first press [PAGE] until “SYSPM” appears, and then press [F1 (SYSPM)].

3.Use [ ], [ ], [ ], and [ ] to move the cursor to “Remain Display.”

If “Remain Display” is not displayed, press [F1 (Prm1)].

4.Use the TIME/VALUE dial to change the setting for the Remain Display.

Remain Display (Remaining Display)

This selects the units of measurements in which the remaining drive space is shown.

Time:

The remaining time for recording is shown in minutes and seconds.

CapaMB:

The remaining time for recording is shown in available megabytes of drive space.

Capa %:

The remaining time for recording is shown as a percentage of total drive space.

Event:

This shows the remaining number of events available for recording and mixing.

5.Press [PLAY (DISPLAY)] to return to the Playlist display.

250