Chapter 19 Using a DAT Recorder (DAT Backup)

11.When the backup procedure is finished, “Please Stop DAT” appears in the display. Stop the DAT recorder and press [ENTER/YES].

12.Press [PLAY (DISPLAY)] to return to the Playlist display.

Canceling the Recover Operation

You can cancel the recover operation by pressing [EXIT/NO] during the recover. Also, when there is an error in song data backed up on a tape, the recover operation is temporarily halted. In such instances, you can choose whether to leave or delete the unfinished song data recovered up to that point.

*This procedure does not correct the drive error, but tries to restore the song and save as much of the data as possible. Depending on the location where the error occurred, some noises may be generated, or settings for the mixer, tempo map, and/or sync track may be lost.

*Loud noises may damage your amplifier and speakers. Turn down the headphones and master volume of the VS-1824 when you check for errors in the song data.

Checking DAT Tape Contents

This operation lets you view the names of songs saved to a DAT tape. Even if you have saved the data of two or more songs in a single backup operation, you can check the name of each song.

1.Connect the VS-1824 and the DAT recorder as shown below.

Optical

Canceling a DAT Recovery Operation in Progress

1. Press [EXIT/NO] during the DAT recovery.

Recovery is stopped, and “Delete Err Song?” (Delete the song containing the error?) appears in the display.

2. If you would like to delete the problem song data that stopped the recovery operation from the hard drive,

press [ENTER/YES]. If you would like to leave it

Coaxial

unchanged, even though recovery is not complete, press [EXIT/NO].

Digital Out

DAT recorder

When an Error is Found in the Song Data

1.If an error is found in song data that was recovered with the DAT Recover operation, “Recover Err Retry ?”—“An error was found, retry the recovery?”—appears in the display.

2.If you want to recover the data, press [ENTER/YES]. If you want to cancel the recovery, press [EXIT/NO].

3.If you press [EXIT/NO] in Step 2, “Delete Err Song ?” appears in the display.

4.If you would like to delete the song data from the hard drive, press [ENTER/YES]. If you would like to keep it as is even though the error is included, press [EXIT/NO].

Digital Out

DAT recorder

242

Page 242
Image 242
Roland VS-1824 owner manual Checking DAT Tape Contents