118
Chapter 8 EZ Routing
5. Press [F2 (STEP →)].
6. Only the source tracks you specified during Step 4 will
be shown. Use [ ], [ ], [ ], and [ ] to
move the cursor and the TIME/VALUE dial to adjust
each of the values.
fig.02-32
7. Press [F2 (STEP →)]. You can return to the previous
screen by pressing [F1 (STEP ←)].
8. Make the settings for the effects. Use [ ], [ ],
[ ], and [ ] to move the cursor and the TIME/
VALUE dial to adjust each of the values. Press [F3 (FX
A)] to make settings to EFFECT A (FX1/2); press [F4 (FX
B)] to make settings to EFFECT B (FX3/4).
fig.02-33
9. Press [F2 (STEP →)]. You can return to the previous
screen by pressing [F1 (STEP ←)].
10.Decide whether or not to record the output of each effect
to a track. First, press the Effect SELECT button for Effect
1 or Effect 2, then press the STATUS button for the track
you want the effect recorded on. To select FX 3 or FX 4,
hold [SHIFT] and press the Effect SELECT button.
fig.02-34
11.Press [F2 (STEP →)]. You can return to the previous
screen by pressing [F1 (STEP ←)].
12.Select mixer channels to be output to the AUX bus. The
AUX bus is useful for sending tracks to an external
effects processor. Use [ ], [ ], [ ], and [ ]
to move the cursor and the TIME/VALUE dial to adjust
each of the values.
fig.02-35
13.Press [F2 (STEP →)]. You can return to the previous
screen by pressing [F1 (STEP ←)].
Cursor Pan
Level
Track Channel
Track to be recorded
Effect Switch
Send Level
Send Pan
Cursor
Track to be recorded
AUX Switch
AUX Send Level
AUX Send Pan/
Balance
Cursor