Roland VS-1824 owner manual Using EZ Routing Templates, Saving an EZ Routing Template, 123

Using EZ Routing Templates

Saving an EZ Routing Template

1.When you have pressed the SAVE button after creating a new setup, the Routing Save screen appears in the display. Turn the TIME/VALUE dial to select the number of the desired memory location for your EZ Routing template.

Routing Number

Routing Name

2.Press [ ] to move the cursor. Use [ ], [ ],

[ ], and [ ] to move the cursor and the TIME/ VALUE dial to enter the user EZ Routing’s name.

The function buttons work as shown below:

[F1 (Hist)]:

Pressing this button will take you through a list of the last 20 names entered, one at a time.

[F2 (Clr)]:

Clears all the characters in the window.

[F3 (Del)]:

Deletes the character where the cursor is positioned.

[F4 (Ins)]:

Inserts a space where the cursor is positioned.

[F5 (Write)]:

Stores the routing and exits the Routing Save screen.

[F6 (EXIT)]:

Exits the Routing Save screen without storing the routing.

If you press [NUMERICS/ASCII] so it is lit, you can use the SELECT buttons to enter characters in a manner similar to using a computer keyboard.

3.After entering the name, press [F5 (WRITE)]. The routing is saved.

4.Press [PLAY (DISPLAY)] to return to the Playlist display.

Chapter 8 EZ Routing

Recalling an EZ Routing Template

1.Press [EZ ROUTING].

The EZ Routing icon appears in the display.

2.Use [ ], [ ], [ ], and [ ] or use the TIME/VALUE dial to move the cursor to the routing you want to use.

3.Press [F5 (Exec)]. If “Exec” does not appear above [F5], press [PAGE] until you see “Exec” above [F5], then press [F5 (Exec)].

4.Press [ ] and [ ] to move the cursor to “Use Template” and press [F5 (Exec)] once more. “Apply this ROUTING ?” appears in the display.

5.Press [YES] to recall the EZ Routing settings. (Or, if you wish to cancel the operation, press [NO].)

6.Press [PLAY (DISPLAY)] to return to the Playlist display.

Deleting an EZ Routing Template

1.	Press [EZ ROUTING]. The EZ Routing icon appears in
	the display.
2.						Chapter
	Use [	], [	], [	], and [	] or use the TIME/
	VALUE dial to move the cursor to the routing you want					8
	to delete.
3.	Press [F6 (Del)]. If “Del” does not appear above [F6],
	press [PAGE] until you see “Del” above [F6], then press
	[F6 (Del)]. “EZ ROUTING Delete OK ?” appears in the
	display.
4.	Press [YES]. (Or, if you wish to cancel the operation,
	press [NO].) The EZ Routing is deleted. The four factory
	templates—“Recording,” “Mix Down,” “Bouncing” and
	“Mastering”—cannot be deleted.
5.	Press [PLAY (DISPLAY)] to return to the Playlist display.

123