Roland VS-1824 owner manual 158, Copy Time

Chapter 10 Track and Phrase Editing

EX1 : Phrase is shorter than interval of FROM and TO

	A
FROM		TO		Time
Copy Times="2," Overlap="Off"
	A		A'	A''
FROM		TO		Time
Copy Times="2," Overlap="On"
	A		A'	A''
FROM		TO		Time

EX2 : Phrase is longer than interval of FROM and TO

	A
FROM		TO			Time
Copy Times="2," Overlap="Off"
	A		A'	A''
FROM		TO			Time
Copy Times="2," Overlap="On"
			A'	A''
	A
FROM		TO			Time

About phrase copying

Please be careful if you copy 2 or more phrases at the same time when Overlap is OFF. If the lengths of the selected phrases are not exactly the same, you will find that the beginning points of each phrase will be different. If you want to carry out such a copying procedure, be very sure the length of the selected phrases are the same. Phrases captured simultaneously with punch in recording or trimmed phrases using the Trim In/Trim Out functions (see p. 159-160), for example, could be used.

EX : In case phrase length defers

	A
	B
	C
FROM		TO			Time
Copy Times="2," Overlap="Off"
	A		A'	A"
	B		B'	B"
	C		C'	C"
FROM		TO			Time

If you are setting Overlap to ON, you do not need to select phrases with the same length. However, it is possible that the ending part of the phrase could be missed if the interval between FROM and TO do not match the phrase length.

Copy Time

Specifies the times (1–99) of copying.

You cannot mix on one V track regularly recorded audio with audio that has been recorded with the CDR Recording Mode ON.

In Songs that use a Recording Mode other than “CDR” follow these rules:

•Even on the mastering tracks, “CDR” V-tracks can only be copied to V-tracks which already have been recorded with “CDR” data, or to new V-tracks which have no data recorded on them.

•V-tracks recorded within a song with a recording mode other than “CDR” cannot be copied to mastering tracks which are already recorded with the “CDR” recording mode ON.

If the above rules are not followed, and the Copy command would mix CDR audio with regular audio, then “Found Illegal Track Pair!” appears in the display and phrase move cannot be executed. Please press [ENTER/YES] and select the move destination again.

10.Press [F4 (Exec)].

11.When the display indicates “Complete,” press [PLAY (DISPLAY)]. You will return to Play mode.

158