Roland VS-1824 owner manual Drive Select, 228

Chapter 17 Using Hard Drives

7.Use [ ] and [ ] to move the cursor to “Source Song.”

8.Use the TIME/VALUE dial to move the cursor to the song you want to extract and press [F3 (MARK)].

By pressing [F2 (ALL)], you can place and remove Marks from all songs. Press [F1 (SelSg)] to view a directory of songs. From here, after you have Marked the song(s) you want to extract, press [F1 (Back)].

9.Press [ ] to move the cursor to “Erase All Songs” and use the TIME/VALUE dial to set the value.

Erase All Songs

When this is set to “On,” the destination drive is initialized before the Song Archive Extract procedure is performed. If you want to perform the extract procedure without erasing any songs on the destination drive, leave this “Off.”

10.Press [F4 (Exec)]. A confirmation message appears in the display.

11.Press [ENTER/YES]. “STORE Current ?” appears in the display. Press [ENTER/YES] if you want to save changes made to the current song; otherwise press [EXIT/NO].

12.Execute the Song Archives Extract. “Insert Disk #” appears in the display. Insert the correct disk number and press [ENTER/YES].

13.When the Song Archive Extract procedure is finished, the screen returns to the Playlist display.

Drive Select

To select either another partition of your internal (IDE) drive, or select another connected SCSI hard drive, use the following procedure:

1.Press [Play (Display)].

2.Hold [Shift] and press [F6 (Utility)]. The Utility menu appears in the display.

3.Press [F4 (DrSel)]. If “DrSel” does not appear in the display above [F4],first press [PAGE] until “DrSel” is displayed, and then press [F4 (DrSel)].

A list of partitions on the currently selected drive as well as other external SCSI drives connected is displayed.

4.Use [ ], [ ], [ ], and [ ] to move the cursor. Select the drive that you wish to make current.

Use the TIME/Value dial to select the current partition.

[F3 (Info)]:

Displays the drive information.

[F4 (Exec)]:

Executes selecting drive.

[F6 (EXIT)]:

Exits the screen.

5.Press [F4 (Exec)]. A confirmation message appears in the display.

6.Press [ENTER/YES]. “STORE Current ?” appears in the display. Press [ENTER/YES] to store the current song; otherwise press [EXIT/NO].

7.If you switch the current drive, the screen returns to the Playlist display.

228