Recording From a CD

The default setting of the VS-1824 does not permit recording the output of CD players using the DIGITAL IN connector. If you want to record from a CD using the DIGITAL IN connection, use the following procedure. You will only need to perform this procedure one time to enable the VS-1824 to record digital signals from CD players.

1.Hold [SHIFT] and press [F5 (System)].

The System icon appears in the display. If the System menu icon does not appear, press [F6 (EXIT)].

2.Press [F2 (GLOBL)].

If “GLOBL” does not appear in the display above [F2], press [PAGE] until it appears, then press [F2 (GLOBL)].

3.Use [ ], [ ], [ ] and [ ] to move the cursor to “CD Digital Record.”

4.Use the TIME/VALUE dial to select “On.”

5.A message concerning copyright appears in the display. After reading this message, press [ENTER/YES]. The same message appears in the back cover of this Manual.

6.A message concerning Licensing Conditions is displayed. After reading this message, press [ENTER/YES]. This message appears in the back cover of this manual. From now on, you can make digital connections and recordings from CD players. If you do not agree to the conditions, press [EXIT/NO]. If you press [EXIT/NO], you will not be able to make any digital connections from CD players.

7.Press [PLAY (DISPLAY)] to return to the Playlist display. You will now be able to record a CD from the digital input (see p. 66 for details on recording from a digital source).

Chapter 4 Recording Operations

Using the Metronome

The VS-1824 features a built-in metronome that will provide a click track at any tempo you specify. By listening to the click track as you record your instrument, you’ll be able to record your performance with more accuracy. Recording using a click track also allows song editing to be done by measure and beat. The metronome tempo can be controlled by the tempo map or sync track MIDI clock. When using this feature, set up the tempo map (p. 202) or sync track (p. 200) beforehand. When you create a new song, the tempo map defaults to a 4/4 rhythm and a tempo of 120.

Turn On the Metronome

1.The metronome is output from both the MONITOR jacks and the PHONES jack. Connect your playback audio equipment to the MONITOR jacks.

2.Hold [SHIFT] and press [EXT SYNC].

The Sync/Tempo screen appears in the display.

Chapter 4

3. Use [ ], [ ], [ ], and [ ] to move the cursor to “Sync Gen.,” and use the TIME/VALUE dial to change the setting.

Sync Gen. (Sync Generator)

This determines on which clock the metronome is played.

Off: Metronome is played on Tempo map.

MTC: Metronome is played on Tempo map.

MIDIclk: Metronome is played on Tempo map.

SyncTr: Metronome is played on Sync track.

4.Press [F6 (EXIT)].

The System menu icon appears.

5.Press [F5 (METRO)]. If “METRO” does not appear in the display above [F5], press [PAGE] until you see “METRO” above [F5], then press [F5 (METRO)].

The Metronome Parameter screen appears.

67

Page 67
Image 67
Roland VS-1824 owner manual Using the Metronome, Recording From a CD, Turn On the Metronome, Sync Gen. Sync Generator