Roland VS-1824 owner manual Capture Audio data from Audio CD Capture function, 192

Chapter 13 CD-RW and Mastering

8.Press [STOP] when you are finished with the CD Player function.

9.Press [PLAY (DISPLAY)] to return to the Playlist display.

If “Please Insert Disc!” Appears in the Display

This indicates the CD-R/CD-RW drive loading tray is open, that there is no disc loaded, or the CD-R/CD-RW drive is not ready for use. Insert a CD-R disc, wait a few moments for the CD-R/CD-RW drive to read the disc, and then press [ENTER/YES].

If “Blank Disc” Appears in the Display

You are attempting to use the CD Player function with a CD-R disc that has no audio recorded on it. Insert a commercially recorded CD or a CD-R disc on which a recording has been made, and try the operation once more.

Capture Audio data from Audio CD (Capture function)

VS-1824 have function to capture Audio data from Audio CDs.

This can capture audio from CD only in case the

sampling rate setting of current song is 44.1kHz.

If you are using a VS-1824 that is not equipped with an internal CD-RW drive, you will need to purchase a separately available CD-RW drive.

For instructions on connecting the drive, refer to “Connecting an External CD-R/CD-RW Drive” (see p. 194).

PX-4220Te, PX-8220Te, PX-W124TSe, and PX-W1210TSE manufactured by PLEXTOR is supported. In case you are using other drives approved by Roland, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor.

1.Load an Audio CD or CD-R/RW disc that contains audio you like to capture on CD-R/CD-RW drive.

For details refer to the column “Inserting a CD” (see p. 234).

2.Press [CD-RW/MASTERING]. CD-RW/Mastering Menu will appear.

192