Roland VS-1824 Items Necessary for CD-R Backup, Inserting a CD, If a disc tray does not open, 234

Chapter 18 CD-R Backup

Items Necessary for CD-R Backup

•VS-1824

•Blank CD-R (Compact Disc-Recordable) or CD-RW (Compact Disc-Rewritable) disc

* You cannot use high-speed compatible CD-RW discs. This mark is printed on high-speed compatible CD-RW discs.

It is recommended to use CD-R discs from the following manufacturers.

Taiyo Yuden Co., TDK Co., Mitsui Chemicals Co., Mitsubishi Chemicals Inc., Ricoh Co.,Ltd, Hitachi Maxell Ltd.

It is recommended to use CD-RW discs from the following manufacturers.

Ricoh Co., Ltd, Mitsubishi Chemicals Inc.

Recommended CD-R/CD-RW discs (approved by Roland) are shown in the owner's manual of the CD-R/RW drive.

If you are using a VS-1824 that is not equipped with an internal CD-RW drive, you will need to purchase a separately available CD-RW drive (approved by Roland). For instructions on connecting the drive, refer to “Connecting an External CD-R/CD-RW Drive” (p. 194).

Inserting a CD

1.Press the eject button and open a disc tray.

2.Pull out a disc tray.

3.Locate the position of center hole of CD at stopper of CD-RW drive.

4.Press the CD downward. The CD will be locked by 3 clips of the stopper.

5.Press disc tray until it is locked in the VS-1824.

If a disc tray does not open

If the power is turned off with the disc still in the drive (such as due to a power failure), the disc tray cannot be opened by pressing the eject button. In this case, you can insert a piece of wire to force the tray open.

It is strictly restricted to eject tray using emergency eject hall during VS-1824 is operating. This is cause error of software.

1.Turn off the power of the VS-1824.

2.Insert a thin object such as a wire into the emergency eject hole. The disc tray will open.

Emergency Eject Hole

234