Roland VS-1824 owner manual Phrase Move, 155, Divide Split To to point

Automatically divide the phrase into two or more phrases.

Manually divide the phrase into two separate phrases.

7.Press [F1 (Back)].

8.Use [ ], [ ], [ ], and [ ] to move the cursor, and use the TIME/VALUE dial to set the parameters.

Type

Select how the phrase will be divided. In this case, select “Split.”

Divide:

Split:

To (to point)

Specify the time location at which the phrase will be split.

9.Press [F4 (Exec)].

10.When the display indicates “Complete,” press [PLAY (DISPLAY)]. You will return to Play mode.

Chapter 10 Track and Phrase Editing

Phrase Move

This operation moves the specified phrase to another location on the timeline, or to a different track. This is convenient for correcting timing mistakes that can occur when recording.

*Each phrase needs to be longer than 0.5 seconds. Otherwise, short phrases will not be played.

A A'

TOTime

B

B'

TOTime

1.Press [PLAY (DISPLAY)].

2.Hold down [SHIFT] and press [F2 (TRACK)].

3.Press [F1 (Tr/Ph)] so that the Phrase Edit Menu appears.

4.Press [PAGE] so that [F3] indicates “Move,” and then press [F6 (Move)].

5.Press [F1 (Selph)].

6.The track SELECT buttons are used to select the source track(s). Press the Track SELECT button to specify the phrase to be moved.

Alternatively, you can use [ ], [ ], [ ], and

[ ] to move the cursor to the phrase that you wish to move, and press [F3 (MARK)] or [ENTER/YES].

The SELECT button stops blinking, indicating it is the track to be moved.

If [F2 (All)] is pressed, all tracks are selected to be moved. Chapter 10

155