Roland VS-1824 owner manual Other Ways to Move In a Song, Changing Playback Position Using Jump

Other Ways to Move In a Song

Changing Playback Position Using JUMP

Besides using markers and locators to move the current time of the song, you can also directly specify a location or measure and beat to move to. This is convenient when designating locations during track and phrase editing.

1.Hold [SHIFT] and press [PAGE (JUMP)].

2.“Jump” appears in the display. Use [ ] and [ ] and the TIME/VALUE dial to enter the time location.

3.Press [F4 (Exec)]. The designated time location is recalled, and you will return to the previous mode.

Change Playback Position Using TIME/VALUE Dial

The current playback time in the display is shown in SMPTE time code. The current measure, beat and marker number are also displayed. Use the following procedure to change the current playback position.

SMPTE Time Code (See Appendices p. 13)

1.Press [PLAY (DISPLAY)].

2.Use the [ ] and [ ] buttons to underline the time value you wish to change.

3.Use the TIME/VALUE dial to change the value.

Hour Minute Second Frame		Measure	Beat
	Sub Frame		Marker Number

Cursor

Turn the TIME/VALUE dial to change the playback time according to the position of the cursor. For example, if the cursor is positioned under the Minutes indicator, each click of the TIME/VALUE dial changes the timeline position by one-minute increments. If the cursor is moved to the subframe location, turning the dial moves the timeline position in increments of 1/10th of a frame. To move the timeline in 1/100th frame increments, hold [SHIFT] and turn the TIME/VALUE dial.

Chapter 3 Playback Operations

Move to the Beginning or End of a Song Using [FF] and [REW]

1.To go to the beginning of actual recorded audio in a song, hold [SHIFT] and press [REW (SONG TOP)].

2.To go to the ending of actual recorded audio in song, hold [SHIFT] and press [FF (SONG END)].

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

Song Top Song End

Chapter 3

47