Roland VS-1824 owner manual Capture Audio data from Audio CD Capture function

Capture Audio data from Audio CD (Capture function)

6.Press [F5 (Exec)] after completion all the settings.

A message concerning copyright appears in the display. After reading this message, press [ENTER/YES].

The same message appears in the back cover of Owner’s Manual.

A message of “Capture to Mastering Tr. In CDR mode?” appears in case of followings.

•17 and 18 tracks * are selected as destination tracks and

•those tracks are selected as stereo pair and

•no song data exists on 17 and 18 tracks *.

*This is applicable to 7 and 8 tracks instead of 17 and 18 in case the Recording mode is “MAS.”

Press [ENTER/YES] when you want to capture in CDR mode. If you press [EXIT/NO], the recording mode of current song will be applied.

If you find message “Illegal Track Pair!”

In the following cases, the tracks to capture audio must be set as Stereo Pair. Unless, unable to capture.

•“CDR” is selected as recording mode of the current song.

•Any phrases in CD-R mode is recorded in destination tracks.

In this case, press [ENTER/YES] and re-set destination track. (See process 4. above)

7.A message concerning Licensing Conditions is displayed. After reading this message, press [ENTER/YES]. This message appears in the back cover of Owner’s manual. A message “CD Capture..” appears on display and starts capture.

8.If you want to capture other audio data from same CD, go back to process 4. above.

9.Press [PLAY (DISPLAY)] to return to the Playlist display.

Canceling the capture

If you want to cancel capture in the middle, operate as follows.

1.Press [EXIT/NO]

A message “Abort?” appears.

2.Press [ENTER/YES] to cease capture. Press [EXIT/NO] to re-start capture.

Capturing Time

Capturing time differs according to recording mode as follows.

Recording Mode

CDR (CD writing) ....	Approx 40% of actual time
MAS (Mastering)	Approx 80% of actual time
Others	Approx 150% of actual time

40455145 ’01-8-REC 1st Edition