Lucent Technologies 5 manual Lines and Trunks, Chapter, Feature Reference. See Automatic

MERLIN LEGEND Communications System Release 5.0	Issue 1
System Manager’s Guide 555-650-118	June 1997
7 Learning More
System Guides Information Finder	Page 7-20

Table 7–3. Continued

To learn about. . .

Check this guide. . .

Lines and Trunks

Adding new lines or trunks to the system	Consult your Lucent Technologies
	representative and System Programming,
	Chapter 4.
Changing the settings on lines and trunks	Consult your Lucent Technologies
	representative and System Programming,
	Chapter 4.
Changing the channels for T1 DS1 service	Consult your Lucent
	Technologiesrepresentative and System
	Programming, Chapter 4.
Changing settings for PRI or NI-1 BRI	Consult your Lucent Technologies
service	representative and network service
	provider.
Changing the way malfunctioning trunks are	Consult your Lucent Technologies
taken out of service	representative and System Programming,
	Chapter 4.
	Feature Reference. See “Automatic
	Maintenance Busy.”
Setting up Remote Access trunks	Feature Reference. See “Remote Access.”
	System Programming, Chapter 4
Changing Automatic Route Selection (ARS)	System Programming, Chapter 4
Facility Restriction Levels for lines/trunks	Feature Reference. See “Automatic Route
	Selection.”
Changing settings for DID or tie lines	Consult your Lucent Technologies
	representative.
Assigning trunks to pools	System Programming, Chapter 4
	Feature Reference. See “Pools.”

For more information about training, contact your Lucent Technologies representative.