Lucent Technologies 5 manual Additional Information, Select Program Extension

MERLIN LEGEND Communications System Release 5.0	Issue 1
System Manager’s Guide 555-650-118	June 1997
6 Managing the System
Centralized Telephone Programming	Page 6-26

NOTES:

If you are programming buttons at an extension with an MLX-16DP,

MLX-5D, or MLX-5 telephone, keep the following in mind:

■The system recognizes the MLX-16DP as an MLX-28D. If you are replacing an MLX-28D with an MLX-16DP, remove all line and feature button assignments from the extension first. This rule also applies when you are replacing other telephones with an MLX-16DP.

■The System Programming Extension Information Report incorrectly reports MLX-16DP telephones as MLX-28D telephones; keep a separate log of the MLX-16DP telephones on your system.

■In releases prior to 5.0, the system recognizes the MLX-5D as an MLX-10D and the MLX-5 as an MLX-10. If you are replacing an MLX-5D or an MLX-5 with an MLX-10D or an MLX-10, remove all line and feature button assignments from the extension first. This rule also applies when you are replacing other telephones with an MLX-5 or MLX-5D.

■In releases prior to 5.0, the System Programming Extension Information Report incorrectly reports MLX-5D and MLX-5 telephones as MLX-10D and MLX-10 telephones respectively; keep a separate log of the MLX-5D and MLX-5 telephones on your system.

■In Release 5.0 and later systems, the system recognizes MLX-5 and MLX-5D telephones as 5-button telephones. The System Programming Extension Information Report shows the correct identification for these telephones.

At the Centralized Programming menu, use the following procedure to program features onto a single telephone. For information about accessing the Centralized

Programming menu, see ‘Starting‘ Centralized Telephone Programming’’ on page 6-23.

￿￿￿Console/Display Instructions Additional Information PC

Select Program Extension.

Centralized Programming:

Make a selection

Program Ext

Copy Ext

Exit Enter

￿