Lucent Technologies 5 manual Task List Adding Operator Features, System Programming

MERLIN LEGEND Communications System Release 5.0			Issue 1
System Manager’s Guide 555-650-118			June 1997
6 Managing the System
	Adding Operator Features		Page 6-64
	QCC Operator Voice Announce to	Disable, Enable
	Busy (Release 4.0 and later only)
	Call Type Queue Priority Level	1 to 7
	Message Center Operation	QCC extension numbers
	Extended Call Completion	Automatic, Manual
	Return Ring	1 to 15 rings
	Position-Busy Backup	Calling group number
	Task List: Adding Operator Features	6

Obtain Form 6a, Optional Operator Features.

If necessary, read “Direct-Line Console” or “Queued Call Console” in the Feature Reference for detailed information about the consoles and the optional operator features.

Plan changes using the planning guidelines above; record the new values on Form 6a.

Open the System Programming menu from the console or a PC with SPM.

Program the change(s), following the appropriate instructions for “Optional

oOperator Features” in System Programming, Chapter 3.

When you have finished, file Form 6a with the rest of the planning forms.

Programming Instructions 6

See the appropriate procedure in the “Optional Operator Features” section of

Chapter 3, System Programming.