Lucent Technologies 5 Idle States Description Procedures, Single-line telephone users do not

Frame format

Board signaling format Board suppression format Board facility compensation

MERLIN LEGEND Communications System Release 5.0	Issue 1
System Manager’s Guide 555-650-118	June 1997

6Managing the System

Introduction to System Programming		Page 6-12
Table 6–4.	Idle States
Idle State	Description	Procedures
System	The entire system (every line and	Select system mode (Lucent
Forced Idle	every extension) is idle. No calls	Technologies only).
	can be made or received.	Identify system operator positions.
	Multiline phone users hear a signal,	Renumber the system (Lucent
	indicating that the phone cannot be	Technologies only).
	used; display phone users see the	Renumber modules (Lucent
	message Wait: System Busy;
		Technologies only).
	single-line telephone users do not
		Identify extensions with voice signal
	hear a dial tone.
		pairs for Voice Announce to Busy.
		Restore backup file.
Extension	No calls can be made or received	Assign call restrictions.
Forced Idle	on that phone or data terminal.	Assign pool dial-out restrictions.
	Multiline telephone users hear a sig- Copy extension assignments.
	nal, indicating that the phone cannot	Assign lines, trunks, or pools.
	be used; display phone users see	Assign labels to a Personal Directory.
	the message Wait: System Busy;
	single-line telephone users do not	Use centralized telephone
		programming.
	hear a dial tone.
Line or Trunk	The line or trunk is idle only at the	Identify loudspeaker paging extension
Idle	instant of programming.	jack.
		Assign trunks to pools.
		Assign incoming or outgoing DID or tie
		trunk type (Lucent Technologies only).
		Specify tie trunk direction (Lucent
		Technologies only).
		Specify tie trunk E&M signal (Lucent
		Technologies only).
100D	Only the 100D module is idle.	Specify (Lucent Technologies only):
Module Idle		Board type