Lucent Technologies 5 manual Coverage Groups, Fax Machines with Message Waiting, Speed Dial

MERLIN LEGEND Communications System Release 5.0	Issue 1
System Manager’s Guide 555-650-118	June 1997
C System Capacities
	Page C-7

Delay announcements per group. In Release 5.0 and later systems, a group can have 10 primary delay announcements and one secondary delay announcement.

Coverage Groups

Senders per group. QCCs cannot be senders.

CTI (Computer Telephony Integration) Link (Release 5.0 and later systems) Extensions per link. Determined by types of telephones used. Maximum of 136 applies when all telephones are analog multiline; when all are MLX telephones, the maximum is 127.

Extension jacks required. The link requires an extension jack on an MLX 008 or 408 GS/LS MLX module; the module must not be of firmware vintage 29.

Fax Machines with Message Waiting

The system can support more than 16 fax machines, but those in excess of 16 cannot use the fax message-waiting indication.

System Operator Consoles

DLCs (Direct-Line Consoles). Two consoles are allowed for each MLX or analog module, with a maximum of eight per system. Up to two Direct Station Selectors (DSSs) can be attached to an MLX operator console, and one is built into the MERLIN II System Display Console.

Ports (not achievable simultaneously)

Voice-mail interface	Although the system software supports up to 24
	voice-mail interface (VMI) ports, all the VMI
	ports must be in the same calling group, and
	the maximum number of extensions in a calling
	group is 20.
Paging	Software real-time limits, loop-start only
Delay announcements	Maximum number of single-line extension jacks
	(if these are used to connect delay
	announcement devices)

Speed Dial

Personal Speed Dial. Single-line and 5- or 10-button telephones only.

System Programming Equipment

Remote access overrides on-site programming except during backup or restore.