Lucent Technologies 5 manual Valid Entries, Unrestricted, Outward-restricted, Toll-restricted

MERLIN LEGEND Communications System Release 5.0	Issue 1
System Manager’s Guide 555-650-118	June 1997
6 Managing the System
Changing Calling Restrictions	Page 6-47

In Release 3.1 and later systems, checking for calling restrictions is reset after entered star codes pass those restrictions (in some areas, star codes are provided by the central office to allow the use of special features available from the local telephone company). In earlier releases, the star code digits were processed as dialed digits by ARS, Allowed Lists, Disallowed Lists, and calling restrictions. Therefore, the actual called party number was not properly processed when a star code was entered. For more information about star codes, see

‘Revising‘ Allowed Lists’’ on page 6-69.

Planning Guidelines 6

Changing calling restrictions may affect other features, including Allowed Lists, Auto Dial, Automatic Route Selection (ARS), Callback, Conference, Coverage, Disallowed Lists, Display, Extension Status, Forward and Follow Me, Night Service, personal lines, Pools, Speed Dial, and SA/ICOM buttons. For more information, see the Feature Reference.

NOTES:

1.You can copy restrictions from another extension as described in “Copy Call Restrictions” in the “Optional Telephone Features” section of Chapter 3 in System Programming.

2.In Release 3.1 and later systems, ports programmed for voice messaging systems (VMI ports) are factory-set as outward-restricted. To permit outcalling from a voice messaging system, you must change this restriction.

Valid Entries

Unrestricted, Outward-restricted, Toll-restricted

Task List:oChanging Calling Restrictions 6

Obtain the following forms, as appropriate:

—6g, Call Restriction Assignments and Lists

—6e, Allowed Lists

—6f, Disallowed Lists

—Forms for individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c

If necessary, read “Calling Restrictions” in the Feature Reference for detailed information about this feature.

Plan changes using the planning guidelines above; record the new values

oon the form(s).

Open the System Programming menu from the console or a PC with SPM.