Lucent Technologies 5 Changing Calling Restrictions, Task List Assigning a HotLine Extension

Models: 5

1 429
Download 429 pages 23.98 Kb
Page 264
Image 264

MERLIN LEGEND Communications System Release 5.0

Issue 1

System Manager’s Guide 555-650-118

June 1997

6 Managing the System

 

 

Changing Calling Restrictions

Page 6-46

 

 

 

 

Task List: Assigning a HotLine Extension

6

 

 

 

Assemble any required system planning forms, for example, System Form 4f, Tip/Ring Equipment.

oOpen the System Programming menu from the console or a PC with SPM.

If necessary, assign a personal line to the extension, following the instructions in “Assign Trunks or Pools to Telephones” in the “Telephones” section of System Programming, Chapter 3.

NOTE:

This task requires an idle condition: Extension Forced Idle.

If necessary, assign or delete intercom or System Access buttons by following the instructions in “Assign Intercom or System Access Buttons” in the “Telephones” section of System Programming, Chapter 3.

Program Personal Speed Dial code 01 with the inside or outside number required, including any ARS or other access codes as necessary. You can use extension programming to program the code at the single-linetelephone, or you can program the number using centralized telephone

programming (see ‘CentralizedTelephone Programming’’ on page 6-23).

If necessary, program the line at the extension for No Ring (see

‘CentralizedTelephone Programming’’ on page 6-23).

If Night Service with Outward Restriction is in use on your system, you may need either to add the HotLine extension to the Night Service Exclusion List or add the number dialed by a HotLine to a Night Service Emergency

oList.

When you have finished, file the form(s) with the rest of the planning forms.

Programming Instructions

6

Console Procedure ExtensionsMoreMoreHotLineDial ext.

no.EnterExitExit

PC Procedure ￿UU￿￿Type ext. no.￿￿

￿

Changing Calling Restrictions

6

Use this procedure to change individual extensions’ calling restrictions to one of the following:

Unrestricted

Restricted from making all outgoing calls

Restricted from making toll calls

Page 264
Image 264
Lucent Technologies 5 manual Changing Calling Restrictions, Task List Assigning a HotLine Extension