Lucent Technologies 5 manual Task List Revising Night Service with Group Assignment

Models: 5

1 429
Download 429 pages 23.98 Kb
Page 297
Image 297

MERLIN LEGEND Communications System Release 5.0

Issue 1

System Manager’s Guide 555-650-118

June 1997

6 Managing the System

 

Revising Night Service with Group Assignment

Page 6-79

 

 

to be assigned to the Night Service group operator’s extension, nor are all lines assigned to an operator position automatically assigned to that operator’s Night Service group. If a line is assigned to a Night Service operator extension but not assigned to the Night Service group, it is excluded from Night Service.

There is no limit to the number of lines and extensions that can be assigned to a Night Service group. A line or extension can be assigned to more that one group. The following types of lines can be assigned to a Night Service group in a Release

4.1or later system:

Analog ground-start and loop-start lines/trunks as well as digital T1 voice operation lines that emulate these types

ISDN digital PRI lines that are routed by line appearance

Digital NI-1 BRI lines

Automated incoming tie trunks

The following types of lines cannot be assigned to a Night Service group:

DID (Direct Inward Dial)

ISDN digital PRI lines that are routed by dial plan

Tie trunks directed to an extension (dial-in tie trunks)

Lines whose ports are programmed for Loudspeaker Paging, Alarm, or Music On Hold

Valid Entries

Extension numbers

Line/trunk numbers

Task List: Revising Night Service with

 

Group Assignment

6

Obtain Form 9a, Night Service: Group Assignment.

If necessary, read “Night Service” in the Feature Reference for detailed information about this feature.

Plan changes using the planning guidelines above; record the new values on Form 9a.

Open the System Programming menu from the console or a PC with SPM.

Program the change(s), following the instructions for “Night Service Group

Assignment” in the “Labeling” section of System Programming, Chapter 3,

oor the summary programming instructions below.

When you have finished, file Form 9a with the rest of the planning forms.

Page 297
Image 297
Lucent Technologies 5 manual Task List Revising Night Service with Group Assignment, Extension numbers Line/trunk numbers