Lucent Technologies 5 manual Changing Trunk Labels, Task List Changing Extension Directory Labels

MERLIN LEGEND Communications System Release 5.0		Issue 1
System Manager’s Guide 555-650-118		June 1997
6 Managing the System
	Changing Trunk Labels	Page 6-83
	Task List: Changing Extension Directory Labels	6

Obtain Form 2a, System Numbering: Extension Jacks.

If necessary, read “Labeling” in the Feature Reference for detailed information about this feature.

Plan changes using the planning guidelines above; record the new values on Form 2a.

Open the System Programming menu from the console or a PC with SPM.

Program the change(s), following the instructions for “Extension Directory” in the “Labeling” section of System Programming, Chapter 3, or the

osummary programming instructions below.

When you have finished, file Form 2a with the rest of the planning forms.

Programming Instructions 6

Console Procedure More→Labeling→Directory→Extension→Dial ext. no.→Enter→Drop→Enter label→Enter→Exit→ Exit→Exit

PC Procedure U!→￿→￿→￿→Type ext. no.→￿→ + 0→Type label→￿→￿→￿→￿

Changing Trunk Labels 6

Use this procedure to establish alphanumeric system labels that help display telephone users identify the line or trunk being used.

To program on the system programming console:

Use the buttons next to the display and line/feature buttons to specify alphanumeric characters and punctuation for labels. Use the template provided with the MLX-20L telephone to see which line buttons correspond to which alphanumeric characters.

To program with SPM:

Use the PC keyboard for labels. All letters appear on the screen in uppercase.

Planning Guidelines 6

The availability of the caller identification information may be limited by local-serving (caller’s) jurisdiction, availability, or central office (CO) equipment.

Valid Entries

Each label can have a maximum of seven characters.