Lucent Technologies 5 manual Task List Removing an Extension

If the telephone does not have a built-in speakerphone (BIS) or Hands-Free Answer on Intercom (HFAI), remove it as such from the system by following the instructions in “Analog Multiline Telephone Without Built-in Speakerphone (BIS) or Hands-Free Answer Intercom (HFAI) Capability” in the “Telephones” section of System Programming, Chapter 3.

MERLIN LEGEND Communications System Release 5.0					Issue 1
System Manager’s Guide 555-650-118					June 1997
6 Managing the System
	Removing an Extension				Page 6-43
	Planning Guidelines				6
	When you remove an extension, you need to remove it from any groups and lists
		which it is assigned, for example, Allowed Lists, calling restrictions, Coverage,
	calling group, Pickup group, paging group, and/or Night Service.
	Task List: Removing an Extension				6
	to		Obtain Form 2a, System Numbering: Extension Jacks. Also obtain any
			relevant forms, including group-assigned feature forms (for example, 7c,
			Group Coverage) and Forms for the individual telephone (for example, 4d,
			MLX Telephone). Appendix D of this guide includes a list of the planning
			forms.
			Open the System Programming menu from the console or a PC with SPM.
			If your system uses the Set Up Space numbering plan (see Form 2a),
			single-renumber the extension jack following the instructions in “Single
			Renumbering” in the “System Renumbering” section of System
			Programming, Chapter 3.
				NOTE:
				This task requires an idle condition: Extension Forced Idle for this
	o			extension jack.
			If you are removing a personal line, Loudspeaker Paging, or Pool button
			assignments (Hybrid/PBX only), follow the instructions in “Assign Trunks or
			Pools to Telephones” in the “Telephones” section of System Programming,
			Chapter 3.
				NOTE:
				This task requires an idle condition: Extension Forced Idle for this
	o			extension jack.
			To remove intercom or System Access button assignments, follow the
			instructions in “Assign Intercom or System Access Buttons” in the
			“Telephones” section of System Programming, Chapter 3.
				NOTE:
				This task requires an idle condition: Extension Forced Idle for this
	o			extension jack.