Lucent Technologies 5 manual Copying Line/Trunk Button Assignments, Select Exit, Select Enter

MERLIN LEGEND Communications System Release 5.0		Issue 1
System Manager’s Guide 555-650-118		June 1997
6 Managing the System
Centralized Telephone Programming		Page 6-32
￿￿￿
Console/Display Instructions	Additional Information	PC

Either continue to copy line assignments and programmed features from the copy extension shown to another extension or go to Step 7.

Select Enter ( ) to continue copying line assignments from the extension currently displayed on Line 1 to additional extensions.

Select Next (￿) if the extension numbers to be copied to are sequential. Select Enter ( ) after completing programming.

Return to Step 4 to continue programming. The extension to be copied from is displayed on Line 1.

Return to the Centralized Programming menu.

Select Exit.

Save your entry.

￿￿￿Select Enter.

Return to the Centralized Programming menu.

Select Exit.	￿
Copying Line/Trunk Button Assignments	6

Use this procedure to copy outside line/trunk button assignments, pool dial-out code restrictions (Hybrid/PBX only), and Night Service information (for operator positions only). You can copy from one extension to another or to a block of extensions with identical requirements. Use system programming for this procedure.

If you are copying assignments from an operator position to a block of extensions that includes both operator and non-operator extensions, the information is copied only to the operator positions; the non-operator positions are not affected.

Similarly, if you are copying assignments from a non-operator position to a block of extensions that includes both operator and non-operator extensions, the information is copied only to the non-operator positions; the operator positions are not affected. The system does not provide an error tone to signal that the copy did not work for all of the extensions in the block.

If you are performing this procedure for the first time, see the detailed steps in “Copy Line/Trunk Assignments” of the “Telephones” section, Chapter 3, System Programming.