Lucent Technologies 5 manual Changing Group Coverage Assignments

MERLIN LEGEND Communications System Release 5.0		Issue 1
System Manager’s Guide 555-650-118		June 1997
6 Managing the System
	Changing Group Coverage Assignments	Page 6-76
	Task List: Assigning
	Disallowed Lists to Extensions	6

Obtain Form 6f, Disallowed Lists and, as appropriate, the form(s) for individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.

If necessary, read “Allowed/Disallowed Lists” in the Feature Reference for detailed information about this feature.

Plan changes using the planning guidelines above; record the new values on the form(s).

Open the System Programming menu from the console or a PC with SPM.

Program the change(s), following the instructions for “Assign Disallowed

Lists to Telephones” in the “System Features” section of System

oProgramming, Chapter 3, or the summary programming instructions below. When you have finished, file the form(s) with the rest of the planning forms.

!SECURITYlALERT:

In Release 3.1 and later systems, Disallowed List number 7 is automatically assigned to voice messaging system ports. To help guard against toll fraud, assign this list to other extensions. For more information, see the section above, “Changing Disallowed Lists.”

Programming Instructions 6

Console Procedure Tables→DisallowTo→Dial list no.→Enter→Dial ext. no.→Enter→Exit→Exit

PC Procedure ￿→ →Type list no.→￿→Type ext. no.→￿→

→￿

Changing Group	6
Coverage Assignments

Use this procedure to assign or remove an extension from a coverage group.

NOTE:

In Release 4.1 and later systems, you can change, on an extension-by-extension basis, the number of rings at a sender’s extension before a call is sent to Group Coverage receivers. For programming information, see Chapter 3, “Common Administrative Procedures,” in System Programming and ‘‘Changing Coverage Delay Options’’ on page 6-50.