Lucent Technologies 5 manual Copying Feature and SA/ICOM Buttons, Program the features

MERLIN LEGEND Communications System Release 5.0		Issue 1
System Manager’s Guide 555-650-118		June 1997
6 Managing the System
Centralized Telephone Programming		Page 6-28
￿￿￿
Console/Display Instructions	Additional Information	PC
Program the feature(s).

****
Press HOME to Exit
Delete	Page	1
	Page	2

Sys Program ListFeature

****= current programming of button selected in Step 6 (Line xxx, voice, feature, or blank)

Dial or type the programming code:	￿
*[nnn] or select List Feature (￿) to
display a list of features you can select
from.

When the line button is programmed, the system automatically returns to the display in Step 5. (Note that this is a sample screen for a line button; other screens may have a different first line.)

Repeat Steps 5 and 6 for each line button you want to program for the exten- sion, or press the Home button to return to the Centralized Programming menu.

Copying Feature and SA/ICOM Buttons 6

You can use the Copy Extension feature to copy an extension’s programmed buttons (with some exceptions) to one or more extensions. Program the features individually on an extension to create a template that can then be copied to other extensions in the system.

Only extensions of the same type can be copied to one another (that is, analog to analog, and MLX to MLX) because the two telephones have different button layouts. For a system that has both analog and MLX telephone types, you need two templates: one for analog and one for MLX.

A Multi-Function Module’s programming can be copied to or from another MFM. A Direct Line Console (DLC) can be copied only to another DLC. Single-line telephones’ and QCCs’ features cannot be copied.

Table 6–6 lists the features that can be copied to another extension. Features that can be copied for DLC operator extensions are listed in Table 6–7.